HB 1727-1987 压板支座
作者:标准资料网 时间:2024-05-15 22:34:27 浏览:8522
来源:标准资料网
基本信息
| 标准名称： | 压板支座 |
| 中标分类： |
机械 >>
工艺装备 >>
组合卡具 |
| 发布日期： | 1987-04-08 |
| 实施日期： | 1987-07-01 |
| 首发日期： | 1900-01-01 |
| 作废日期： | 1900-01-01 |
| 出版日期： | 1900-01-01 |
| 页数： | 2页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 机械 工艺装备 组合卡具
【英文标准名称】:Electricallypropelledroadvehicles.Measurementofroadoperatingability.Part2:thermalelectrichybridvehicles.
【原文标准名称】:电动道路车辆.道路使用能力测量.第2部分:热电混合车辆
【标准号】:NFR52-111-1999
【标准状态】:现行
【国别】:法国
【发布日期】:1999-08-01
【实施或试行日期】:1999-08-20
【发布单位】:法国标准化协会(AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:测量技术;道路车辆;定义;电动汽车;特性;性能规范;内燃机;速率;加速度;试验条件;驱动类型;起动试验
【英文主题词】:
【摘要】:
【中国标准分类号】:T47
【国际标准分类号】:43_120
【页数】:17P;A4
【正文语种】:其他
Product Code:SAE AMS3346
Title:Silicone Rubber, 1000 Psi (6.89 Mpa) Minimum Tensile Strength, 55-65 Durometer
Issuing Committee:Ams Ce Elastomers Committee
Scope: This specification covers a silicone rubber in the form of sheet, strip, tubing, molded shapes, and extrusions.These products have been used typically for parts required to operate or seal at temperatures from -90 to +205 degrees C (-130 to +401 degrees F), compounded especially for high strength, but usage is not limited to such applications. Silicone elastomer is resistant to deterioration by weathering and aircraft piston engine oil and remains flexible over the temperature range noted. These products are not normally suitable for use in contact with gasoline or aromatic fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the elastomer.
Rationale: This specification covers a silicone rubber in the form of sheet, strip, tubing, molded shapes, and extrusions.These products have been used typically for parts required to operate or seal at temperatures from -90 to +205 degrees C (-130 to +401 degrees F), compounded especially for high strength, but usage is not limited to such applications. Silicone elastomer is resistant to deterioration by weathering and aircraft piston engine oil and remains flexible over the temperature range noted. These products are not normally suitable for use in contact with gasoline or aromatic fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the elastomer.
